WRTSL54GS debridged

Okay … we got the serial port running (same like WRT54GS), so we could be more risky. After some tries I decided to work analog the WRT54G models.

Successfull was the following modifications to factory (linksys) defaults:

nvram set vlan0ports=”0 1 2 5*”
nvram set vlan1ports=”4 5*”
nvram set vlan0hwname=”et0″
nvram set vlan2ports=”3 5″
nvram set vlan2hwname=”et0″
nvram set dmz_ifname=”vlan2″
nvram set lan_ifname=”br0″
nvram set lan_ifnames=”vlan0″
nvram set wan_ifname=”ppp0″

Now the door is open to extend the functionality of the openwrt router

# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 7296 3420 3876 47% /
none 15276 36 15240 0% /tmp

Hrhrhrhr … :-) Disassemble photos can be found here

The WRTSL54GS debridged by Cyconet Blog, unless otherwise expressly stated, is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 Unported License. Terms and conditions beyond the scope of this license may be available at blog.waja.info.